Small concrete mixer is a special vehicle that can quickly mix concrete. It can prevent cement segregation. Today, I will introduce the inspection and maintenance of its air filter.
The inspection of the filter of the small concrete mixer should be to carefully observe the deep folds inside the filter. Theoretically, when fuel is burned per unit volume, about 10000 unit volumes of clean air are required.
Sometimes, the filter surface of the small concrete mixer looks clean, but its interior is already dirty, and it must be replaced immediately. However, in Expressway and traffic congested areas, due to the concentration of automobile exhaust, the atmospheric carbon content is obviously high.
The dust content of open highways is lower than that of rural and construction areas. Prevent premature engine wear and maintain good working condition. For places with high dust concentration, such as construction sites and sandy areas, the maintenance and replacement frequency of air filters should be higher.
Under normal operation of the filter. The function of the air filter is to filter the dust, carbon, water vapor and other sundries in the air, and ensure that clean air enters the cylinder before sucking in the fuel. There are three basic particle pollutants in the atmosphere, namely dust, residue and carbon particles.
Preventive maintenance of automotive air filters does not emphasize this point. In general, the manufacturer recommends that the normal maintenance and replacement cycle of the air filter is 48000km, and the routine inspection shall be conducted every 24000km; The recommended replacement period is 24000km, but it remains unchanged.
This is all about the inspection and maintenance of the air filter of the mixer truck. In fact, there are other parts that need more maintenance, so that the equipment can be better used. For more precautions, please visit the website http://pxcyw.cn Consult us.